NEW EQUIPMENT Despite the slow economy, NCTM continues to make investments in machinery to meet expected industry needs
Bridgeport VMC-XP2000 With Probing/Inspection Capacity X=78.7", Y=31.5", Z=19.7"; High speed machining; Spindle speed 15,000 rpm; Contouring at 315" per minute Johnford DMC 4000 With Probing/Inspection Capacity X=160.0", Y=70.8", Z=42.0" High speed machining; Spindle speed 10,000 rpm; Contouring at 315" per minute
Bridgeport VMC-XP2000 With Probing/Inspection Capacity X=78.7", Y=31.5", Z=19.7"; High speed machining; Spindle speed 15,000 rpm; Contouring at 315" per minute
Johnford DMC 4000 With Probing/Inspection Capacity X=160.0", Y=70.8", Z=42.0" High speed machining; Spindle speed 10,000 rpm; Contouring at 315" per minute
DRIV™ TECHNOLOGY (Direct Resin Injection and Venting)
Invented by North Coast, DRIV™ Technology allows air trapped in the mold and the fabric to be evacuated, while the resin is infused in specific locations and under controlled sequences. The results are complete surface wet-out, stability of fabric placement, reduced mold deflection; and press sizes are reduced or eliminated entirely when coupled with out-of-press designs.
Our patent applications have been filed with the U.S. Patent Office for this innovative technolgy.
North Coast Tool and Mold Corp.
North Coast an AGC AeroComposites company
4605 Spring Road • Cleveland, Ohio 44131 • 216-398-8550 • Fax: 216-661-5777
This document maintained by oltjon@Northcoast.us Copyright © 2016 North Coast Tool and Mold Corp.